Southwestern Style Ladder Necklace by Mary Harding Jewelry
Over time I have learned that I like necklaces with lots of stuff up front. By that I mean multiple strands, thick rows of large beads dripping with fringe , fiber and more. In fact , that is how I got into free form peyote stitch: it made it possible to put all sizes of beads together to create a wall of color to wear around your neck and over your chest.
In the last year or so I discovered the ladder necklace and found that it too lets you create bands of color, texture and interest without out having to have statement size beads or complex seed beading skills.
So today I am going to share with you a basic ladder building necklace tutorial with you. You can visit my Pinterest board of Ladder Necklaces for further inspiration HERE.
Size: Overall 24 inches
24 inches of 6.5 mm etched brass or
1 Yard of waxed linen
Size 3 mm Toho Magatama seed
2 flat disk beads
2 round beads
2 twisted disk art beads with floral
1 handmade brass and solder toggle
1 handmade ceramic 2 hole art bead
about 3 ½ inches in diameter
2 10 mm jump rings
3 5mm jump rings
My Version of a ladder necklace consists of several key components:
1. a two hole or 2 loop pendant
two hole pendants by MaryHardingJewelry
2. Thee rungs
close up of the three rungs
3. Chain and Toggle Clasp
close up of chain and toggle clasp
Next I have included a Fleshed out version of the supplies which includes comments and info about these 3 components of the necklace as well as a few suggested suppliers.
version of Supplies ( including suppliers)
used two packages of Vintaj 16 inch 6.5mm etched oval cable chain to
create two pieces of 12 inches of chain. I like this size of chain
because the links are large enough to count easily ( but not so large
as to dominate the necklace), a necessary task to make sure that you
ladder rungs are evenly spaced so t hat you central pendant hangs
properly. You can get similar chain on line at Fusion Beads.com;
Artbeads.com Bello Modo.com and most likely at your favorite craft supplier.
1 yard. Pick a color that will go well with the other beads you will
be using. There are many many colors available in most online and
brick and mortar beading shops. I used 3 ply waxed linen and it fit
easily thru the see beads I used to construct the ladder rungs. You
can find different colors and thicknesses of waxed linen on Etsy and
by searching with Google.
used TOHO Magatama seed beads for the ladder rungs and to attach the
disk and round beads. They worked well with the waxed linen. The
curved tear drop shape of these seed beads gives an organic look to
the ladder rungs of this necklace. I picked a color that was a mix
of brown and turquoise. A small 8 gram package of these Magatma beads
will give you way more than you need but I am sure you find other
uses for them. They are really wonderful beads to work with.
Available online FusionBeads
other online stores and some brick and mortar craft and bead stores.
The disk and round Beads: The flat and round ceramic beads are handmade by FireFlyDesign Studio. They are very well made and her colors are wonderful and she always has the right size. I made the twisted disk beads and they were raku fired last year at a community workshop I attended.
The Art Bead 2 hole Pendant I did some searching on the internet for two hole art bead pendants and found that they are not that plentiful but here are some suggestions for where to find a few:
And finally the directions for how to put this all together.
1. Measure out 2 even pieces of chain i.e. they should each have the same number of links( I counted 47 links for each piece of chain- and measure about 11 1/2 inches for a 24 inch neclace considering that the toggle clasp will take up about 1 1/2-2 inches. ( 1 1/2 inches using the clasp pictured.)
2. Attach one of the 10mm jump rings to each length of chain.
3. Then attach your 2 hole pendant to the jump rings (see picture below)
2 hole pendant attached to chain links with 10mm jump rings
4. Making the rungs
Cut a 9 inch piece of the 3 ply waxed linen. One for each rung. The rungs gradually widen as you go up.
For the first run, string on 20 of the Magatama seed beads. Use 24 on the 2nd rung and 32 on the third. For the first rung (lowest one) center the 20 Magatam seed beads on the 9 inch piece of waxed linen. Tie the linen to the inside of the 3rd link of each piece of your chain with an over hand knot. Do not cut the tails. Do the same for the 2nd rung on the inside of the 7th link and for the 3rd rung on the inside of the 11th link of each piece of chain. Check to make sure that the rungs hang evenly and straight.
5. Adding the Ceramic Beads
To attach the ceramic round and disk beads at the both sides of each rung you are going to thread the long end of the waxed linen remaining from stringing on the seed beads, through the hole in your bead, add 3 Magatama seed beads and then go back through that hole and tie a slip knot around the threads. See pictures below:
Attaching the disk and round beads with a picot and in the following picture securing with one or two slip knots. Use a drop of glue to further secure.
Tying the slip knot around the attached round or disk bead at the side of each ladder rung
Close up of beads at end of rung attached. Repeat procedure for each rung.
6. Attaching the Toggle Clasp
Use the 5mm jump rings to attach the toggle clasp and its bar to the ends of the chain.
Now your necklace is finished!!!
I hope you will give the Ladder Necklace a try. You can probably find most of these supplies in your stash and improvise for what you do not have. Or you could try your hand at one of the necklaces on my Pinterest Board.
Thanks so much for stopping by!!